Specialty Grade 5 Titanium Rod For Aerospace And Medical

Aerospace and medical-grade titanium alloy rods are solid rods made from high-purity sponge titanium as a base, combined with a precise ratio of aluminum and vanadium alloys, and manufactured through multi-stage vacuum melting, multi-directional forging, precision rolling, heat treatment, and non-destructive testing. They are categorized into three main types: aerospace industrial grade Gr5 (Ti-6Al-4V), permanent implant medical grade Gr23 (Ti-6Al-4V ELI ultra-low gap), and pure titanium Gr1/Gr2 medical rods. Customization of high-end aerospace titanium alloy rods such as TC11 and Ti80 is also available.

These rods possess six core properties: ultra-high specific strength, resistance to high and low temperatures, strong corrosion resistance, excellent biocompatibility, non-magnetic properties, and fatigue resistance. They are the core base material for aircraft structural components, rocket propulsion components, orthopedic implants, dental matrices, and high-precision surgical instruments. Leveraging the Baoji Titanium Valley industrial chain, our company supports standard stock + OEM from drawings, precision sizing, high-precision polishing, and tolerance customization. A complete set of material certificates and third-party testing reports are provided with each shipment.

1. Density: 4.51 g/cm³, only 57% of that of steel, reducing weight by 40%~45% while maintaining ultra-high structural strength (essential for weight reduction in aerospace).
2. Elastic modulus: Approximately 110 GPa, far lower than stainless steel, significantly reducing bone resorption in medical implants.
3. Operating temperature range: -196℃ cryogenic to 400℃ high temperature; mechanical properties do not drop drastically in high and low temperature environments, suitable for low-temperature space applications and high-temperature engine conditions.
4. Corrosion resistance: Naturally forms a dense TiO₂ passivation film, resistant to seawater, acids, alkalis, and body fluid corrosion; does not corrode or release metal ions in human body fluids for decades.
5. Non-magnetic: No interference with MRI and CT scans; will not generate magnetic interference in aerospace precision electronic equipment.

• Diameter range: Φ1.0mm – Φ350mm
• Standard length: 1000mm – 3000mm, or custom cut to length as required
• Supply tolerances:
• Cold-drawn bright bar: H7/H8 grade
• Grounded or machined bar: H9/H10 grade
• Surface condition: Black forged state / Machined / Centerless ground / Polished / Straightened

Basic Physical Properties:

Density: 4.47 g/cm³ (only 60% of steel, significant weight reduction); Elastic Modulus: 110~114 GPa; Phase Transition Temperature: approximately 975℃; Long-term Stable Operating Temperature Range: -270℃~400℃; Completely non-magnetic, will not interfere with precision aerospace sensors or medical MRI equipment.

Standard mechanical properties in annealed state：

All batches of products are tested individually, with samples retained for each batch, ensuring full traceability. Original manufacturer's material certificates and authoritative third-party testing reports (Northwest Nonferrous Metals Institute, BaoTi Testing Center) are available.

1. Chemical Analysis: Spectroscopic sampling to verify alloy composition and impurity content.
2. Mechanical Testing: Tensile strength, hardness, and impact toughness sampling.
3. Metallographic Analysis: Grain level control to eliminate coarse grains and abnormal structures.
4. 100% Ultrasonic Testing (UT): Detection of internal cracks, inclusions, and porosity (mandatory for aerospace applications).
5. Surface Fluorescence Penetrant Testing (PT): Detection of surface microcracks; mandatory testing for medical rods.
6. Dimensional Inspection: Caliper, micrometer, and roundness meter sampling to check tolerances and straightness.

(I) Aerospace Field (Mainly Gr5 Titanium Alloy Rods)

1. Aerospace: Aircraft landing gear components, fuselage reinforcing ribs, hydraulic valve bodies, engine fasteners, UAV structural spindles
2. Aerospace: Rocket body supports, cryogenic fuel tank connectors, satellite structural frames, aerospace valves, cryogenic components for deep space exploration
3. Military High-End Equipment: Lightweight load-bearing structures, corrosion-resistant hydraulic rods, stable operation in high and low temperature alternating environments

(II) Medical and Biopharmaceutical Field (Gr23 ELI Implant-Grade + Gr1/Gr2 Pure Titanium Rods)

1. Orthopedic Implants: Bone plates, cortical bone screws, spinal rod-and-screw systems, artificial joint matrix, intramedullary nails for fracture fixation
2. Dental Field: Implant matrix, crown post and core, orthodontic anchorage screws, denture framework blanks
3. Surgical Instruments: Minimally invasive surgical scalpel rods, clamping instruments, orthopedic grinding tools, corrosion-resistant medical equipment structural components
4. Advantages: Titanium metal has an elastic modulus close to that of human bone, excellent osteointegration, no cytotoxicity, no metal allergy, and can be permanently implanted into the human body.

1. Origin Advantages: Located in Baoji, "China's Titanium Valley," our factory integrates smelting and forging from the source, eliminating middlemen and offering prices superior to coastal traders, with controllable delivery times.
2. Clear Grade Classification: Ample stock of aerospace-grade products; medical implant-grade products are produced in strict isolation to prevent mixing and contamination, meeting ISO13485 medical production control requirements.
3. Precision Machining Capabilities: We can perform chamfering, grooving, and segmented precision machining according to drawings, supporting small-batch sampling (MOQ starting from 1kg) + large-batch supply.
4. Corrosion Protection and Packaging: Fumigation-free plywood wooden crates, ensuring no oxidation or rust during ocean shipping.
5. Complete Documentation: Material certificates, furnace number traceability sheets, flaw detection reports, third-party testing documents, and related materials are provided in one place.

E-mail: garychen3215@hotmail.com

Address: No.35, Baoti Rd, Baoji city, Shaanxi Province, China

Contact: Mr. Gary Chen

Phone: +86-917-8883215

Mobile/WhatsApp: +86 13092900605

Hot Tags: specialty grade 5 titanium rod for aerospace and medical, China specialty grade 5 titanium rod for aerospace and medical manufacturers, suppliers, factory, Dental Implant Titanium Bars, titanium cost per pound, titanium filler rod welding, titanium s, titanium square rod, titanium welding rod