Titanium square tubing is a thin-walled titanium tube with a hollow rectangular cross-section, made of pure titanium or titanium alloy. This unique structure allows it to achieve lightweight design while maintaining high strength.
The manufacturing process of titanium square tubing mainly includes two methods: seamless forming and welded forming. Seamless forming ensures that the tube is completely joint-free, making it suitable for use in high-pressure environments; welded forming utilizes precision welding technology to achieve customized production of complex specifications. In addition, titanium square tubing can also be produced through hot rolling. Besides increased wall thickness, extra-thick-walled tubing can achieve corner dimensions and edge straightness that meet or even exceed the standards of resistance-welded cold-formed square tubing.
High-end Structural Support Applications of Titanium Square Tubes
1. Aerospace Frames: Aircraft cargo hold supports, rocket fuel tank support frames (Ti-6.5Al-1Mo-1V-2Zr square tube has 30% higher strength than superalloy steel); satellite solar panel deployment mechanisms (rectangular cross-section increases torsional stiffness by 50%).
2. New Energy Infrastructure: Photovoltaic power station support structures (resistant to salt spray corrosion, lifespan > 25 years); offshore wind power platform anti-corrosion supports (resistant to CI corrosion, replacing traditional carbon steel).
Special Industrial Equipment
1. Chemical Corrosion Protection Systems: Strong Acid Reactor Support (Annual Corrosion Rate <0.01mm in Aqua Regia Environment); Nuclear Waste Treatment Equipment Load-Bearing Frame (Radiation Resistance + Corrosion Resistance Dual Protection)
2. Shipbuilding and Marine Engineering: Deep-Sea Submarine External Skeleton (Gr12 Alloy, Withstands 6000-Meter Water Pressure); Seawater Desalination Unit Evaporator Support Pipe (Resistant to Erosion Corrosion)
III. Precision Instruments
1. High-end Equipment Integration
Semiconductor wafer transport track (ultra-high cleanliness surface treatment)
Low-temperature superconducting magnet support frame (unchanged toughness at -196℃)
IV. Core Characteristics
Lightweight and High-Strength: Density 4.5g/cm3, Ti-6.5Al-1Mo-1V-2Zr square tube tensile strength reaches 1100MPa;
Extremely Corrosion Resistant: Resistant to seawater, chloride ions, and organic acids, extending service life in chemical environments by 3 times.
Baoji Reliab Metal Materials Co.,Ltd
Mobile: 0086 13092900605
Sales Department 1: WhatsApp +8613092900605 (Mr.Gary)
Sales Department 2: +8613092913521(Ms. Sophia)
Address: No.35 Baoti Rd, Weibin District, Baoji, China
